conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 08:56

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

‹ Sequence not resized when reading and writing to propertyfile bootstrap_toolchain should be wonderfull but ... ›
»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 21:28.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 20:40.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 19:52.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 19:04.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 18:16.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 17:28.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 16:44.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 16:00.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 15:16.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 14:32.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 13:48.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 13:04.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 12:24.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 11:40.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 12:24.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 11:00.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 11:00.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 17:28.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 16:44.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 13:48.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 10:20.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 11:40.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by peter on Fri, 2010-10-22 09:36.

On Friday 22 October 2010 10:58:57 Peter Soetens wrote:
> On Friday 22 October 2010 10:46:24 Tinne De Laet wrote:
> > On Fri, Oct 22, 2010 at 10:44, Tinne De Laet
> >
> > <tinne [dot] delaet [..] ...> wrote:
> > > Hi,
> > >
> > > Just to report that after converting my components from 1.10 to 2.0
> > > the #include <rtt/Method.hp

is not replaced, causing a compile
> > > error.
>
> Which version are you using ? You should use the 1.2 version of the tool

Typo: 1.1 version, released on Oct 12.

Peter

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 10:20.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 14:32.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 19:04.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Sat, 2010-10-23 04:08.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Sun, 2010-10-24 06:12.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»

conversion script does not replace Method.hpp

Submitted by Tinne De Laet on Fri, 2010-10-22 09:36.

Hi,

Just to report that after converting my components from 1.10 to 2.0
the #include <rtt/Method.hp

is not replaced, causing a compile
error.

Tinne

»